accessible bluetooth caliper

By sebno, 12 November, 2025

Review Category

Rating

4 Stars

Review

The 100-700-B06 caliper from iGaging is a digital measuring tool that connects via Bluetooth to a smartphone or computer.

Once paired, it functions like a keyboard, entering the measurement value into any application.

For example, Excel or Windows Notepad, the Notes app on iOS, etc.

in case your input method is not the English QWERTY keyboard, you need to add one on your device.
You must switch to the English keyboard before sending the measurement; otherwise, the entered value will not be readable.
On Windows, you can switch keyboards using the Alt-Shift shortcut.
On iPhones, the switch is located in the bottom left corner of the keyboard.

The caliper has five buttons: four small circles below the screen: power, unit, origin, and ABS.
The fifth is a small rectangle on top; this is the data button, used to send the measurement and establish the Bluetooth connection.

To put the caliper into pairing mode, turn it on with the power button and press the data button for about 5-6 seconds.
The next steps depend on your device.

The caliper will not beep. If you are blind, you can check that it is powered on using the beMyAi app or another similar app.
For visually impaired users, the numbers are printed in a fairly large font, but the screen is not very bright.

The caliper will automatically turn off after 5 minutes.

To reconnect it, press and hold the data button for 4-5 seconds after turning it on with the power button.

The unit button allows you to switch between millimeters and inches, and the origin button resets the value to zero.
By default, even if the caliper jaws are fully closed, it often displays 0.02 mm.
The ABS button toggles the measurement between absolute and incremental when pressed for about 3 seconds.
, the data button near the locking wheel allows you to send the measurement with a short press.

Minor bugs: when the caliper enters the value, it adds a line break; VoiceOver or NVDA only announce the value after the decimal point.

With NVDA in Notepad, simply press the up arrow to read the full value.
With VoiceOver, you need to switch to word-by-word reading mode using the rotor and swipe up.

In short, an accessible and practical measuring tool that allows us to read measurements to the hundredth of a millimeter for : inside, outside, and depth measures.
iGaging offers the same caliper in 100mm and 300mm lengths.

Devices Accessory Was Used With

iPhone

Disclaimer

The article on this page has generously been submitted by a member of the AppleVis community. As AppleVis is a community-powered website, we make no guarantee, either express or implied, of the accuracy or completeness of the information.

Options

Comments

By OldBear on Wednesday, November 12, 2025 - 11:22

The iOS Calculator app used to accept the enter as an equal command and read the data entry each time you pressed the button without the need for swiping. In some recent update, it stopped working that way. Same goes for the Numbers spreadsheet, which you used to be able to get to read the entry automatically without swiping. I don't know if this is a feature or a bug of iOS that might be changed again in the future, however, using Notes or some other text app does make a record of your entries, and that turns out to be useful in several situations.
Another issue that has come up for me is that the Quick Nav might need to be toggled to text entry with the left and right arrows together on a regular keyboard before the iPhone will accept data from the device. It interprets things in the data from the calipers as a navigation command otherwise.

By sebno on Wednesday, November 12, 2025 - 17:42

I should have done a search before posting my review :) I hadn't seen yours. Reading it, I found the information I needed about the battery. Thanks!
about quick nav, i don't need to do that here.
the only problem i have with the iphone is the keyboard switch which disappears with the caliper connected. once it's off keyboard switch is back.

By treble1999 on Wednesday, November 12, 2025 - 17:51

Thanks for posting this. Would be curious if anyone knows of a good source to get one as it's out of stock on Amazon UK. Not seeing anywhere locally in Ireland which stocks them. UK (even post-Brexit) is generally our best bet.

By sebno on Wednesday, November 12, 2025 - 18:00

i haven't search on amazon.de, but it's available in france : https://www.amazon.fr/dp/B0716B8Q99?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

By treble1999 on Thursday, November 13, 2025 - 17:57

Super, appreciate you posting the link. Never thought of looking on Amazon FR.

By sebno on Saturday, November 7, 2026 - 15:47

Hello everyone, I wrote with claude code an NVDA add-on for Windows that makes the iGaging Bluetooth digital caliper speak automaticly the measure when you press data. What it does: - When you press the DATA button, NVDA speaks the measurement, for example "21.99 millimeters". No more need to put down the calipers and return to the computer keyboard to read the recorded measurement. - Nothing is typed into the active window, whether you are in an edit field or in browse mode on a web page. - Each measurement is added to a text file, which also opens in a spreadsheet. By default it goes to a folder in your Documents, and you can choose another folder or turn this off. - It can copy each measurement to the clipboard (off by default). - NVDA announces when the caliper connects or disconnects, because the caliper gives no sound of its own. - A command reports the battery level. It has no default shortcut: assign one in Input gestures, "Caliper" category, if you want it. Windows only reads this level from time to time, so NVDA also says how old it is. - The add-on is available in English, French, German and Spanish. Installation: 1. Open the iGaging-caliper.nvda-addon file, confirm, and restart NVDA. 2. Pair the caliper in Windows: Settings, Bluetooth and devices, Add device, Bluetooth, then choose "Bluetooth Keyboard". Good to know about this caliper: - It does not turn off by itself. iGaging says it stops after 5 minutes without use, but mine keeps its display on and still sends measurements after 2 hours without being touched, connected to Windows or to my iPhone. Another Amazon customer noticed the same thing. My guess is that this 5-minute stop only concerns Bluetooth when no computer or phone picks up the connection, which is common with Bluetooth keyboards: if nothing connects within a few minutes, hold DATA again for about 5 seconds. Spontaneous shutdowns or disconnections only show up when the battery gets weak, so if that starts happening, change the battery. - To turn it off completely and save the battery: press ON/OFF to turn the display off, briefly press DATA to check that nothing is sent any more, then hold DATA for about 5 seconds to turn Bluetooth off. With the add-on, NVDA then says "Caliper disconnected". - The caliper never reconnects by itself. If the link is lost, even for one minute (Bluetooth turned off on the computer or phone, sleep mode, caliper out of range), hold DATA for about 5 seconds to reconnect. On the other hand, as long as it stays connected, it stays ready: I left it on the bench for 2 hours and it measured right away, without doing anything. - To start again, press ON/OFF, then hold DATA for about 5 seconds to reconnect. Wait a few seconds before measuring; iGaging recommends 10 seconds. - If you only press ON/OFF, the display turns off and DATA sends nothing, but the caliper stays connected, so NVDA does not say "disconnected". - On the iPhone, VoiceOver gives a useful clue in an edit field: when the caliper's Bluetooth comes on, it announces that the on-screen keyboard is hidden, and it announces the keyboard again when you turn the caliper's Bluetooth off. iGaging uses the same manual for the B04, B06, B08 and B12 sizes, so they should all behave the same way, but I have only tested one caliper, model 100-700-B06, on Windows 11 with NVDA [NVDA version]. If you have another size, or Windows 10, I would be glad to hear whether it works, especially the connection announcements and the battery level. The measurements depend on the F24 key sent by the caliper, and the connection announcements depend on the name "Bluetooth Keyboard". For now, I’m sharing the add-on via Dropbox, but I’m going to set up a GitHub account and go through the process to make the add-on available on the NVDA add-on store. download link : https://www.dropbox.com/scl/fi/n0zldb8yk3e76u88l8l1q/igaging-caliper.nvda-addon?rlkey=7dyinpislyyq202mhptj1774u&st=2qsjzh80&dl=1 Seb

That is a very good idea. Thank you for doing that. It will be very useful to any future NVDA users, and I will direct them to this thread if anyone asks about calipers. And that is a very good one, even when not using the bluetooth and just comparing sizes of items like drills and holes or depths of holes, anything like that, it's good hardware.
It's sad iOS was changed in the way it was, but that is the way of life.